3M™ Sensored Cable Accessory QX-2.0 92E 621-1 TI-V1I1-1-C 1, Application up to 12 kV, 1 Phase/Kit, 1 Kit/Case
- Part Number SCATERM
- 3M ID 7100251159
Details
Highlights
- Real-Time measurements from medium-voltage power grid
- High accuracy analog Voltage and Current outputs help enable the measurements of phase and higher order harmonics
- Termination or Plug-In type of network interface
- Sensored outputs can be interfaced with different types of RTU via 3M interface device
- Precalibrated at the factory
- Does not require modification of the installed equipment
3M™ Sensored Cable Accessories efficiently achieve visibility into the medium voltage (MV) power grid via real-time, accurate measurements of Voltage and Current at underground nodes throughout the MV distribution system.
The 3M™ Sensored Cable Accessories provide the ability to measure critical parameters - voltage, current, and phase angle - from underground medium-voltage power grid. This solution incorporates highly accurate voltage and current sensors integrated into the cable termination or separable connector to enable precise measurements without modification of the installed equipment. Furthermore, the sensors are passive components, thereby not requiring external power source for sensing. 3M patented connection system and cold shrink technology assure the easy and fast installation for a wide range of cable cross sections. Configurations without current sensor are also available.
Typical Properties
| Brands | 3M™ |
| Indoor/Outdoor | Indoor |
| Maximum Conductor Size | 240 mm² |
| Maximum Conductor Size (Imperial) | 500 kcmil |
| Minimum Conductor Size | 70 mm² |
| Minimum Conductor Size (Imperial) | 2/0 AWG |
| Product Type | Cold Shrink |
| Shielding Type | Wire Shield |
| Smallest Saleable Unit | Kit |
| Termination Type | Single Termination |
| Voltage Rating | 6,35/11 kV |
Resources
Safety Data Sheets
Document Number: MSDS_4233011_GB_EN
(PDF)
