3M™ Performance Gravity HVLP Atomising Head Refill Kit
- | Select product options for IDs.
Details
Highlights
- Quick-change nozzles range from 0.9 to 2.0 for spraying a wide range of industrial and automotive coatings
- Like-new spray performance with each new atomising head
- Use exclusively with the 3M™ Performance Spray Gun and 3M™ PPS™ Series 2.0 Spray Cup System
- Exceptional pattern control, atomisation and transfer efficiency
- Nozzle sizes include: 0.9, 1.2, 1.3, 1.4, 1.6, 1.8, and 2.0
3M™ Performance Gravity HVLP Atomising Heads are designed to deliver premium spray performance for coatings including paints, clear coats and topcoats. Replaceable nozzles are built exclusively for gravity feed applications with the 3M™ Performance Spray Gun System and 3M™ PPS™ Series 2.0 Spray Cup System, offering like-new spray performance with the change of each nozzle.
What makes the 3M™ Performance Spray Gun system different is the technology inside the quick-change replaceable nozzles. Because paint and coatings never pass through the body of the spray gun - only the atomising head - it's like getting a brand new spray gun every time you swap the nozzle. Get the pattern control, atomisation and transfer efficiency you expect from a premium spray gun; all while helping to drive more consistent spray performance across each job, every day. 3M™ Performance Gravity HVLP Atomising Heads are available in 0.9, 1.2, 1.3, 1.4, 1.6, 1.8, and 2.0 for spraying a wide range of industrial and automotive coatings, including high-viscosity coatings, sprayable fillers, high-build primers, primer surfacers, sealers, single-stage top coats, solvent-based paints, waterborne paints and clearcoats. The replaceable nozzles are used exclusively with the gravity-fed 3M™ PPS™ Series 2.0 Spray Cup System, which helps to reduce material waste, mess and contamination compared to traditional metal paint cups. Forget about tearing down spray guns and soaking in solvent. Our complete, integrated spray system is your path to smarter cleanup. The atomising heads attach to the 3M™ Performance Spray Gun needle and are tightly secured to the spray gun with a specially-designed locking collar. No additional tools required for changeouts. Simply remove the nozzle from the spray gun, and either appropriately clean the fluid tip or replace it to keep your spray gun performing like new.
Typical Properties
| Applications | Clear Coat |
| Brands | 3M™ |
| Inner Diameter (Imperial) | 0.035 in, 0.047 in, 0.051 in, 0.055 in, 0.063 in, 0.07 in, 0.078 in |
| Inner Diameter (Metric) | 0.9 mm, 1.2 mm, 1.3 mm, 1.4 mm, 1.6 mm, 1.8 mm, 2 mm |
| Product Colour | Orange, Purple, White, Transparent, Red, Blue, Green |
| Product Type | Atomizing Head Refill Kit |
| Smallest Saleable Unit | Pack |
Resources
3M™ Performance Spray GunData Sheets
(PDF, 1MB)
3M™ Performance Spray Gun H/O Conversion Pack 26837 - NERData Sheets
(PDF, 1011KB)
Connect with us. We’re here to help.
Send Us a Message
Thank you for your interest in 3M. In order to help us manage and respond to your query effectively, we politely ask you to provide some key information, including your contact details. The information you provide will be used to respond to your request through email or telephone by a 3M representative or one of our authorised business partners with whom we might share your personal information consistent with the 3M privacy policy
Thank you for your contacting 3M
We have received your message and are now looking into your enquiry
One of our representatives will get in touch with you by phone or email
An error occurred.
Similar products
| Inner Diameter (Metric) | 0.9 mm, 1.2 mm, 1.3 mm, 1.4 mm, 1.6 mm, 1.8 mm, 2 mm | |||
| Product Colour | Orange, Purple, White, Transparent, Red, Blue, Green | |||
| Product Type | Atomizing Head Refill Kit | |||
| Inner Diameter (Imperial) | 0.035 in, 0.047 in, 0.051 in, 0.055 in, 0.063 in, 0.07 in, 0.078 in |
3M™ Performance Gravity HVLP Atomising Head Refill Kit
3M™ PPS™ Series 2.0 Cups
3M™ PPS™ Series 2.0 Kits
3M™ PPS™ Series 2.0 LidsRelated products
