3M™ Dyneon™ Fluoroelastomer FE 5522

A Raw Gum for Transfer and Injection Molding
3M™ Dyneon™ Fluoroelastomer FE 5522 has numerous attributes that make it ideal for use in transfer and injection molding. This raw gum is also used to adjust parameters, e.g. crosslink density and viscosity. It does not include an incorporated curative, but is curable with amine or bisphenol-type curing agents. Dyneon fluoroelastomer FE 5522 is packaged in slab form and is available in individual 27.5 lb. (12.5 kg) polyethylene bags in 55.1 lb. (25.0 kg) boxes.

Dyneon fluoroelastomer FE 5522 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FE 5522 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

Delivering Custom Solutions
3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state-of-the-art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FE 5522 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has decades of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

Recommended Applications

• Injection molding
• Transfer molding