3M™ Cold Shrink Cable Breakout Boots 8560 Series
- | Select product options for IDs.
Details
Highlights
- Ensures excellent insulation and void-free sealing of cable breakouts
- High dry- and wet-insulation resistance
- Creates an environmental enclosure for individual cable phases
- Has an outer jacket diameter range of 1.3 to 1.94 inches
- 3-way outlet
- Dark gray silicone rubber construction
- Withstands temperatures of 105 °C
- RoHS 2011/65/EU Compliant
3M™ 8560 3 Way Cold Shrink Cable Breakout Boot is made of a dark gray silicone rubber and protects the phase leg breakout of 3 way medium voltage power cables. It shields power cables from moisture, contamination, corrosion, ozone, UV radiation, physical contact and other hazards in associated environments. It allows quick installation while accommodating a wide range of cables.
3M™ 8560 3 Way Cold Shrink Cable Breakout Boot features an open end and is factory expanded and mounted on a removable plastic core. When the supporting cores inside the boot are removed, this pre stretched boot shrinks to the pre determined diameter, creating an environmental enclosure for individual cable phase legs and the overall cable jacket. It can be used in conjunction with cold shrink silicone rubber termination assemblies and RJS Series rejacketing sleeves for shielded power cable terminating applications. It's compatible with cold shrink silicone rubber termination products and RJS Series phase rejacketing sleeves. RoHS 2011/65/EU Compliant.
Typical Properties
| Applications | Insulation, mechanical protection, repair, Sealing of the spine cutting stranded cable |
| Cable Insulation Outside Diameter Range | 1.92-3.10 in |
| Cable Insulation Outside Diameter Range (metric) | 48.8-78.7 mm |
| Cable Type | Cable with plastic and rubber insulation |
| Dielectric Strength (V/mil) | 587 V/mil |
| Elongation | 780 Percent |
| Inner Diameter After Heat-Shrink | 20.8 mm |
| Inner Diameter After Shrink (Imperial) | 0.82 in |
| Inner Diameter Before Heat-Shrink | 30 mm |
| Inner Diameter Before Shrink (Imperial) | 1.18 in |
| Inner Diameter Finger After Shrink | 20.8 mm |
| Inner Diameter Finger Before Shrink | 33 mm |
| Jacket Outside Diameter Range | 1.92 - 3.10 in |
| Jacket Outside Diameter Range (metric) | 48.8 - 78.7 mm |
| Material | Silicone |
| Maximum Voltage Rating | 35 kV |
| Metallic Shield Diameter Range | 0.82 - 1.18 in |
| Minimum Bundle Diameter (metric) | 20.8-30.0 mm |
| Model | Cold-shrink |
| Number of Conductors | 3 |
| Operating Temperature (Celsius) | Up to 180 °C |
| Outer Diameter After Shrink (Imperial) | 1.92 in |
| Outer Diameter After Shrink (Metric) | 48.8 mm |
| Outer Diameter Before Shrink (Imperial) | 3.1 in |
| Outer Diameter Before Shrink (Metric) | 78.7 mm |
| Product Colour | Grey |
| Product Type | Cold Shrink, Cable & Wire Accessory |
| Shrink Type | Cold Shrink |
| Temperature Rating | 356°F (180°C) Class H |
| Tensile Strength (Imperial) | 1370 Pound-Force Per Square Inch |
| Total Length After Shrink | 146 mm |
| Transition Type | 1 - 3 Breakout |
| Units per Case | 1.0 |
| Voltage | 1 kV |
| Voltage Application | Low Voltage |
